Bat-caddy X4 Series User Manual page 6

ASSEMBLY INSTRUCTIONS (Continued)
6. Place the battery pack on the
battery tray. Insert the 3-prong
battery plug into the caddy outlet
so the notch aligns properly and
attach T-connector onto the battery.
(SLA Battery lead is attached to battery)
Then attach Velcro strap. Tightly fasten the Velcro strap
underneath the battery tray and around the battery. It is
recommended that you DO NOT fasten the screw on the
plug to the outlet, so in case of tip-over, the cable can
unplug from the socket.
Note: BEFORE CONNECTING make sure that caddy power is OFF, the Rheostat
Speed Control is in OFF position and the remote control is stored securely!
7. For X4R and X4 Pro insert anti-tip wheel into holding bar
on motor housing and secure with pin.
X4R Only
8. Unpack remote control and install batteries with plus and
minus poles as indicated in the diagram in the battery
compartment of the unit.
6
Pin