Page 1
MODEL: ESTOP-RM-KIT E-STOP Gas Timer Surface Mounting Kit For use with Firegear Outdoors MatchThrow (MT), Thermocouple Manual Safety (TMSI) Fire Pits and BBQ Grill applications Installation and Operating Instructions IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE THIS APPLIANCE...
Page 2
This ESTOP-RM-KIT is surface mounted design to be installed with a Firegear Outdooors Match Throw (MT) fire pit, a Thermocouple Manual Safety (TMSI) fire pit or BBQ grill applications. Use either the ESTOP1-0H or ESTOP2-5H gas timer models with this kit. The ESTOP Gas Timer is not supplied with this kit and must be purchased seperately.
Page 3
Fig.7 Cover plate outer dimensions. Fig. 5 Installing cover plate. Step 8: After the ESTOP-RM-KIT is installed then use gas rated Teflon tape on the gas lines to connect gas supply. Ensure you check for gas leaks before final operation.
Page 4
FOR TECHNICAL SERVICE, CALL: (800) 966-8126 Firegear Outdoors 17322 Gothard St Huntington Beach, CA 92647 Web Site: www.firegearoutdoors.com Manual changes often occur, ensure to check the Firegear Outdoor website for any recent updates and warranty information. ESTOP-RM-KIT REV. A Page 4...
Need help?
Do you have a question about the ESTOP-RM-KIT and is the answer not in the manual?
Questions and answers