Related Manuals for hygena Underbasin 539/9974
Summary of Contents for hygena Underbasin 539/9974
- Page 1 Hygena - Underbasin Assembly lnstructions 539/9974 - please keep for future reference 527/9142 Dimensions Width - 48cm Depth - 28cm Height - 60cm Important– Please read these instructions fully before starting assembly Issue 1 - 21/03/15...
- Page 2 WARNING In order to help prevent overturning – To help prevent product toppling over please follow the below steps:- Do not allow children to climb or hang on the furniture Do not place heavy items in the top drawers Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose You will need to provide wall plugs and screws applicable for your wall type...
- Page 3 Components - Panels If you have damaged or missing components, call the Customer Helpline: Please check you have all the panels listed below...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.In some cases more fittings may be supplied than are required. Glue x 1 Male comlock x 11 12mm Female comlock x 11...
- Page 6 Assembly lnstructions Step 1 Fitting male camlocks 1.Insert 11 x male camlocks into Panel 2 , 3 , 5 , 6 , and tighten using a suitable screwdriver .
- Page 7 Assembly lnstructions Step 2 1. Glue and insert 12 x dowels into panel 1 , 2 , 3 , 4 , 5 , shown.
- Page 8 Assembly lnstructions Step 3 Attaching side panel 1. Glue holes in left side panel 1 , connect back panel 2 to left side panel 1 as shown. 2. Insert 1 x female camlocks to attach left side panel 1 to front panel 2 Use a Screwdriver to turn the 1 x female camlock...
- Page 9 Assembly lnstructions Step 5 1. Glue holes in right side panel 6 connect back panel 5 and front panel 3 to right side panel 6 . 2.Insert 4 x female camlocks to attach back panel 5 and front panel 3 . Use a Screwdriver to turn the 4 x female camlock clockwise to lock.
- Page 10 Assembly lnstructions Step 7 Attach hinge 1.Connect 4 x hinge the top panel 8 with 8 x screws show. Use a Screwdriver to turn the female camlock clockwise to lock. Please refer to the "Using Camlocks" section at the front of this instruction for further assistance.
- Page 11 Assembly lnstructions Step 8 Attach top panel 1. Connect top panel 8 , 9 to the unit with 8 x screw as shown. Hinge adjustment: a: To move the top panel up or down, loosen screws shown and move top panel to suit b.To move the top panel in or out, loosen screws shown...
- Page 12 Assembly lnstructions Step 9 1.Use 4 x stickers cover camlocks on 2x side panel 3 and left upright 5 as shown. Step 10 1.Insert 4 x shelf holders to 2 x side panel 3 and left upright 5 and right . 2.Attach 4x panel 10 and onto shelf holder as shown.
- Page 13 Assembly lnstructions Step 11 1.Using 2 x nylon straps to the back of left back 7 & right back Step 12 It is recommended that the unit is fixed to a wall. 1.Move the unit into desired position. Warning: The unit is heavy.
Need help?
Do you have a question about the Underbasin 539/9974 and is the answer not in the manual?
Questions and answers