Jamara CCX Pro 2,4 GHz Instructions Manual page 15

Hide thumbs Also See for CCX Pro 2,4 GHz:
Table of Contents

Advertisement

Caratteristiche | Functions
E POINT
IT
Con questa impostazione è possibile determinare l'angolo di sterzata
del servo. Se il servo dello sterzo a fondo scala (destra o sinistra) dif-
ferisce, è possibile regolarlo.
Valore di uscita è al 100%.
Impostazione da 0 a 120%
Premere il tasto „Enter"e selezionare „E POINT" nel menu. Per selezi-
onare la direzione del servo, premere il canale (1, 2 o 3) e la direzione
desiderata (1 = sterzo, 2 = leva del gas, 3 = tasto del terzo canale).
Premere „END" per confermare l'impostazione del canale. Usare la
manopola per impostare il valore e premere Enter per confermarlo.
TRIM
Con questa impostazione è possibile defi nire la posizione neutra del
servo.
Valore di uscita è N00
Impostazione di L30 per N00 fi no a R30 e F30 per N00 fi no a B30.
L = sinistra, N = zero, R = destra, F = avanti, B = indietro
Premere il tasto „Enter"e selezionare „TRIM"nel menu. Il canale lam-
peggia. Premere „END" per confermare l'impostazione del canale.
Selezionare con la manopola il valore desiderato e premere Enter per
confermarlo. With this setting you can set the neutral position of the
servos.
GB
With this setting you can set the steering angle of your servos. If your
steering servo differs at full scale (left or right) differ, you can adjust
it with this setting.
Output value is 100%.
Displacements from 0 to 120%
Press „Enter" and select „E POINT" in the menu. To select the servo
direction, press the channel (1, 2 or 3) ind the desired direction (1 =
wheel, 2 = throttle, 3 = third channel key). Press „END" to enter the
setting of the channel. Select with the rotary knob to set the value
and press Enter to confi rm the value.
Output value is N00
Setting of L30 to N00 to R30 and F30 to N00 and B30.
L = left, N = zero, R = Right, F = Forward B = Back
Press „Enter" and select „TRIM" in the menu. The channel will fl ash.
Press „END" to enter the setting of the channel. Select with the rotary
knob to set the value and press Enter to confi rm the value.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

06 1200

Table of Contents