Chicco 7389 Manual page 16

Home-travel bottle warmer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
- Before using the bottle warmer, always check that the product and all of its components are not
damaged. If in doubt, do not use the bottle warmer and contact your local retailer or qualified
experts.
- Check that the voltage and frequency (see voltage rating on the plate located underneath the
appliance) correspond to those provided by your mains network and/or the car cigarette lighter.
The electrical system where the appliance is used must conform to all safety regulations in force
in the country the appliance is being used.
- Connect the appliance to a mains socket that is easy to access.
- Never place the bottle warmer directly on or near hot surfaces, hobs, or onto delicate surfaces or
surfaces that may be sensitive to humidity and/or heat.
- Use heat-resistant glass or heat-resistant plastic feeding bottles only: never use disposable feed-
ing bottles.
- When using the product normally, always pay attention to the hot steam generated by the heated
water to prevent burns
- For hygiene-biological reasons, bottle warmers must be used for warming ready-to-eat meals,
and never to cook them. The ideal temperature when warming food is around 37°C . Never reheat
food more than once, or for over an hour.
- The final temperature of the food and the warming cycle time both depend on the amount of
food being reheated, the starting temperature (ambient or fridge temperatures), the consistency
of the mix, the position of the selector knob, plus the type and size of the containers (plastic feed-
ing bottles, glass feeding bottles, jars of baby food).
- When the appliance has been running non-stop for 60 minutes, it will automatically switch off,
allow it to cool down completely, (disconnect it from the mains) before using it again.
- Never touch the bottle warmer with wet or damp hands.
- Never touch the bottle warmer if it accidentally falls into water; unplug it immediately and do not
use it again; contact expert qualified operators or Artsana S.p.A. for further instructions.
- If the bottle warmer is faulty and/or not working correctly, switch it off immediately and discon-
nect the plug from the mains socket. Do not attempt to open and/or tamper with the product.
Contact your retailer or one of Artsana S.p.A. ' s authorised service centres.
- If any repair work is needed, contact expert qualified operators or Artsana S.p.A. only. Incorrect
repairs performed by unauthorised technicians can cause serious damage or injury to users.
- If you have any doubts on the contents of this instruction manual, please contact your retailer
or Artsana S.p.A..
- When disposing of packaging, parts which wear out or the appliance itself, dispose of them at
an appropriate differentiated collection point, as requested by the laws in force in each country.
SYMBOLS KEY
= double insulation
= Appliance in compliance with the essential requirements laid down in EC Directives in
force.
= WARNING!
= user instructions
= please read the instruction manual
16
De
We
at h
ligh
the
Be
ref
DE
a) M
b)
c) P
d)
d1
d2
d3
e) C
f ) C
US
US
Wa
ins
To
gra
the
Be
1. P
2. P
W
N
NB
an
jars
wa
3. S

Advertisement

Table of Contents
loading

Table of Contents