Step 3 - Test Data Connection To The Device - Profort multiGuard Master IO Start-Up

Step 3 - Test data connection to the device:

1. Press Operation to open the user interface.
2. Test the system by typing "OM" in the
3. Then press the GPRS icon and wait for the return signal from the device
4. The issued command is sent to the device as Data (blue)
5. The device is now operating on data 
6. Continued programming of device from here by pressing Setup
Go enjoy and thank you for choosing Profort
Own notes:
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
File:
Web programming international GB
Command line
- 6 - af 6
KAP side:
dato: 03. marts 2021