Step 1.1 - Mobile Phone -> Device - Profort multiGuard Master IO Start-Up

Table of Contents

Advertisement

Step 1.1 - Mobile Phone -> Device:
1. First prepare the SIM card so that the PIN is 1234 or deactivated.
2. Insert the SIM card into the device.
3. Turn on the unit and wait for one flash every 2. seconds
4. Send a sms to the device with 1234 EG access point name ( is space)
Defines APN * for the Internet connection.
-and send a sms to the device at 1234 EG APN user password, if required by the
relevant mobile operator on the location *.
In this example, the text should be as follows:
1234 EG data.lycamobile.se Imse plus.
Remember the spaces!
5. Send a sms to the device with 1234 EA xxxxxxxx yyyyyyyy
where xxxxxxxx = device username and yyyyyyyy = device mobile number without
preset countries self-dialing codes.
Profort recommends using the same username as the mobile phone number.
The instruction enables Internet access with EH User name and creates
N0 own number.
6. Wait for the unit to flash again every 2. seconds
7. The unit is then ready for the next Step 2.
File:
Web programming international GB
- 2 - af 6
KAP side:
dato: 03. marts 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the multiGuard Master IO and is the answer not in the manual?

This manual is also suitable for:

Multiguard master rfMultiguard din9Multiguard din6Multiguard din4Multiguard technic rfMultiguard technic io ... Show all

Table of Contents