Summary of Contents for Profort multiGuard Technic RF
Page 1
QUICK-MANUAL for multiGuard Technic RF Mounting 1. Prepare a SIM card so that the PIN code is 1234 or deactivated. Mount the card in the unit. The unit now has 1234 as password or runs without a password. The card is turned the way shown below.
2. Install the Profort PC Program in a computer with Windows by downloading the program from www.profort.com. Start the program and type in the product key which can be found on the page. 3. Type in the number of the COM-port that the PC uses.
Page 3
(Point 1) or larger or smaller than zzzz (Point 2), an alarm is sent. 1234 V1 A TEXT Alarm text LOW on analogue input 1 is sent when the value becomes smaller than the value defined in Point 1/yyyy (Vx M yyyy zzzz). www.profort.com...
Notice: input signal has higher priority than command S0 (S + zero) and B0 (B + zero) For further help: see the manual on the CD or on www.profort.com Management of relay and functions with call from telephone Relay: Call the unit. Type in 1234 (password) when the connection is established, and await two ’beeps’. Type in the chosen code and end the call.
30 min. (Default setting) Other management The unit can also be managed through the PC program and all the functions can be controlled directly on the Internet. See more in the manual or for Internet management log on www.profort.com www.profort.com...
Page 6
Delete macro no. 1 Deletes macro 1 (M0..M9). For further help: see the manual on the CD or on www.profort.com Connection of temperature probe The unit has a built-in plug (AUX) for montage of e.g. temperature probe. The built-in switch must be placed on the left side for the probe to be used. For the probe to measure humidity and temperature the GSM unit needs to be set up.
Temperature – 20 °C - +55 °C Antenna 1 internal antenna for GSM-modem. Possibility for external antenna (Profort-no. 369003) 1 internal antenna for RF. Possibility for external antenna (Profort-no. 369003) The Profort PC Program Quick-setup Compatible with all versions of Windows. The PC needs to have a COM-port (RS232). A USB-RS232- converter or connection through Internet via GRPS must be used.
Page 8
12 VDC power supply (inclusive) 3,6 V Li-ion back-up battery (inclusive) Design box for wall mount Plug for external IR-transmitter IP-65 box for multiGuard® DIN4/6/9-series Waterproof box DIN-rail for 4/6/9 modules 3 PG inputs www.profort.com...