Profort multiGuard DIN4 Quick Manual

Profort multiGuard DIN4 Quick Manual

Advertisement

Quick Links

1. Prepare a SIM card so that the PIN code is 1234 or is deactivated. Mount the card in the unit. The
unit has now 1234 as password or runs without a password. The card must be placed as shown
below.
2. Connect inputs, outputs and power cable (12-24 VAC/DC) and if necessary a rechargeable 3,6 V Li-
ion battery.
3. Turn on the power. A red diode is lit. After max. 1 min. the diode flashes approx. every 2 sec., and
the unit is ready.
DIP-switch for analog input
1 ON:
0-10 VDC
2 ON:
0/4-20 mA
3 ON:
PT-100
4 ON:
Profort probes
All OFF:
digital input
QUICK GUIDE for 4 modules

Installation

The GSM unit interior
Voltage
Input, digital:
www.profort.com
AC max. 230 VAC, 6A
DC max. 30 VDC, 6A
max. 24 VDC
max. power 2 mA
max. 0-10 VDC
Only print voltage when
The DIP-switch 1 is on, and 2-4
are off
Pg.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the multiGuard DIN4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Profort multiGuard DIN4

  • Page 1 0/4-20 mA DC max. 30 VDC, 6A 3 ON: PT-100 Input, digital: max. 24 VDC 4 ON: Profort probes max. power 2 mA All OFF: digital input Input, analog: max. 0-10 VDC Only print voltage when The DIP-switch 1 is on, and 2-4 are off www.profort.com...
  • Page 2 3. Create a new unit in the list and choose multiGuard DIN4 as unit. When you press SAVE the portal sends a text message to the unit, which connects it to the Profort server via GPRS/Internet on the SIM-card.
  • Page 3 0-20 mA. (DIP-switch 2=ON) 0 20 4-20 mA. (DIP-switch 2=ON) -5 20 PT100. (DIP-switch 3=ON) -309 115 Profort PTC. (DIP-switch 4=ON) -132 63 1234 V1 M 5 30 Add 2 alarm points The unit sends alarm e.g. when temperature passes 5 and 30°C.
  • Page 4 ‘TEMP’ is sent return temperature (‘1234’ is omitted in macros). Additional help: see the manual on www.profort.com Control of relay and functions with call from telephone Relay: Call the unit. Press 1234 (password), when the connection has been established and await two ’beeps’. Enter the desired code and hang up.
  • Page 5 30 min. (Default setting) Additional control The unit can also be controlled by use of the PC program and some functions can be controlled directly from the internet. See more in the manual or log on to internet management via www.profort.dk www.profort.com...
  • Page 6 Example: 1234 M1 SHORT PULSE <S0;B0> TEMP Play macro Plays macro with the name TEMP (PIN code is omitted when executing macros) 1234 M1 Delete macro Deletes macro 1 (M0..M9 and R0..R9). Additional help: see the manual on www.profort.dk Version 3.16...
  • Page 7 69x86x57 mm, weight: 125 g. Temperature – 20 °C - +55 °C Antenna 1 internal antenna for GSM-modem. Possibility of adding external antenna (Profort-no. 369003) with 2,5 m cable and 5 m extension (Profort no. 301110) or 10 m extension (Profort no. 301111) www.profort.com...
  • Page 8  12V DC power supply (inclusive)  3,6V Li-ion back-up battery (inclusive)  Box for wall mount  Connector for external IR-sender IP-65-box for GSM unit  Waterproof box  DIN-rail for 4 and 9 modules  3 PG-inputs www.profort.dk...

Table of Contents