Step 2 - Web Server <-> Device - Profort multiGuard Master IO Start-Up

Step 2 - Web server <-> device:
1. If working from Step 1.1 - Open in any browser, web server www.setup.masterview.dk
2. Select language DK or GB by pressing the flag in the upper right corner.
3. Press Control Units
4. Press Create Existing
5. Select the relevant device from the pictures in Choose the model you have
6. Here you can change the Unit type
7. Enter the same phone number as in Step 1.1 pos 5 yyyyyyyy
8. The username xxxxxxxx = 12345678 is "automatically" dragged into this field!
9. These boxes: APN, user & APN password is not required! – Already done in Step 1.1!
10. Press Save and PC, Tablet or SMARTphone is ready for the next step.
- 5 - af 6
File: KAP side:
Web programming international GB
dato: 03. marts 2021