Completed Installation Illustration; Sectional Door - Chamberlain Series 1000E Owner's Manual

BEFORE YOU BEGIN, PLEASE TAKE SOME TIME TO CAREFULLY EXAMINE THE ILLUSTRATIONS OF A
TYPICAL GARAGE DOOR OPENER INSTALLATION ON BOTH A SECTIONAL AND A ONE-PIECE DOOR.
Some installation instructions vary for sectional and one-piece doors. Follow only those instructions which apply
to your door type.
Do you have a finished ceiling in your garage? If so, you will need a support bracket and additional fastening
hardware. Refer to Step 4, Page 13 for specific requirements.
Do you have a lightweight or metal door (or does it have glass panels)? If so, horizontal and vertical
reinforcement is required. Refer to Step 8, Page 17.
If possible, install the door opener 2.1m or more above floor with the manual release handle mounted
1.8m above the floor.

SECTIONAL DOOR

SECTIONAL
INSTALLATION
DOOR INSTALLATION
Horizontal & Vertical
Support - Not Supplied
(Needed Only for
Lightweight Garage
Door Installation)
ONE-PIECE DOOR
INSTALLATION
ONE-PIECE DOOR
INSTALLATION
Support Bracket
and Fastening
Hardware
(Not Supplied)
Access Door
Header
Garage
Door
Support Bracket
and Fastening
Hardware
(Not Supplied)
Cable
Pulley Bracket
Access Door
Header
Bracket
Door Bracket
Garage
Header
4
Header Bracket
Cable Pulley
Trolley
Bracket Cable
Garage
Door
Spring
Horizontal
Straight
Garage Door
Door
Reinforcement
Arm
(If needed)
Curved
Door
Arm
Door Bracket
Vertical Garage Door
Reinforcement (if needed)
Cable
Trolley
Curved
Straight
Door
Door
Arm
Arm
Door
Chain
Manual
Trolley
Release
Chain
Manual
Trolley
Release