Table of Contents
Advertisement
TORUS USER GUIDE
Inclinometer Assembly
Martin Audio supplies an optional remote angle monitoring system which can used to check the tilt angle of the array. It consists of a sensor
(mounted within the flying frame) and a remote display unit. Interconnection is via a standard XLR mic cable.
Fitting the inclinometer sensor to the flying frame
The TORUS flying grid may be fitted with an inclinometer sensor which is available as an optional accessory.
To install the inclinometer a 2.5mm hex tool is required
The sensor is attached to the grid with 4 x M4 button head screws
Attach the inclinometer and bracket assembly to the T12GRID using the 2 x M4 fixings provided. Front end is fixed using the bottom hole
and rear end is fixed using the upper slot.
TORUS USER GUIDE V1.0
23
Copyright © 2021 Martin Audio Ltd.
Advertisement
Table of Contents
