Table of Contents
Advertisement
The table is used to select the DSP and output channel used per circuit. For vertical T12 arrays, independent DSP channels can be
assigned to each circuit.
An FIR Hi-Shelf is available on the DSP EQ to control the balance of the array.
For horizontal arrays, only one DSP channel is required.
TORUS cabinets have an LED for identification, this can be toggled from within the amplifier's control panel. The output channel is muted
to prevent audio from passing to the circuit when the LED is active.
TORUS USER GUIDE V1.0
Copyright © 2021 Martin Audio Ltd.
19
TORUS USER GUIDE
Advertisement
Table of Contents
