Table of Contents
Advertisement
TORUS USER GUIDE
Essential Maintenance
To perform maintenance on this product the following tools listed below are needed.
4mm hex tool
6mm hex tool
Replacing the LF Driver
Remove the countersunk hex fasteners from the grille. (4mm hex tool)
Remove the socket cap fasteners from the LF phase bung in a star pattern. There are 8 around the circumference of the driver and 2 on
the side next to the HF horn. (6mm hex tool).
TORUS USER GUIDE V1.0
46
Copyright © 2021 Martin Audio Ltd.
Advertisement
Table of Contents
