TORUS USER GUIDE
Lift the array to a height where the next cabinet can be positioned underneath. Either lift the cabinet into position or lower the array onto
the cabinet below.
Remove the rigging pins from the cabinet above, rotate the links on the cabinet below and insert the rigging pins to secure.
HF Left
Rotate the T12TRIG through 180 degrees and repeat the steps shown on page 35 to rig the T12TRIG beneath the SCXF118. Rotate the
links on the T12TRIG
Lift the array to a height where the cabinet can be positioned underneath. Either lift the cabinet into position or lower the array onto the
cabinet below and secure both side using the TORUS rigging pins.
TORUS USER GUIDE V1.0
37
Copyright © 2021 Martin Audio Ltd.