Table of Contents
Advertisement
TORUS USER GUIDE
Remove rigging pin and rotate the link through 180 degrees.
Position the T12GRID on top of the TORUS cabinet and rotate the links and insert the rigging pins to secure. Make sure the cabinet is
secured on both sides.
Lift the array to a height where the next cabinet can be positioned underneath. Either lift the cabinet into position or lower the T12GRID
onto the cabinet below.
Rotate the links on the cabinet above and insert the rigging pins to secure.
Repeat the process until the desired amount of TORUS have been vertically arrayed. A maximum of 6 cabinets can be flown from the
T12GRID.
TORUS USER GUIDE V1.0
28
Copyright © 2021 Martin Audio Ltd.
Advertisement
Table of Contents
