Table of Contents
Advertisement
TORUS USER GUIDE
In a horizontal array the HF horn can be positioned at the top or bottom of the array.
Acoustic Design
TORUS low frequency section consists of a 12" (300mm) neodymium driver in a ported reflex configuration to maximise low frequency
extension. The driver is fitted with a phase plug in front of the cone to increase mid-band sensitivity to enhance projection in the vital vocal
band of frequencies.
The HF section consists of 3 x 1.4" (35mm) exit neodymium compression drivers mounted on a Dynamic Horn Flare™ with a flexible
pattern control that can be manually adjusted between 90°, 60° or 75° (Asymmetrical).The system moves and locks the waveguide whilst
also adjusting the horn mouth including the low diffraction termination into the baffle which ensures that the horn geometry remains
correct to produce the optimum settings for the dispersion you have selected.
The horn is adjusted from the front of the cabinet. This is done without the need to remove the grille.
Landscape Deployment
TORUS combined in landscape creates a vertical array. In this mode the combined fixed angle of the cabinets becomes the vertical
dispersion, and the flexible dispersion can be adjusted in the horizontal.
TORUS USER GUIDE V1.0
7
Copyright © 2021 Martin Audio Ltd.
Advertisement
Table of Contents
