Table of Contents
Advertisement
Accessories
T12POLERIG
The T12POLERIG allows a single cabinet (T1215 or T1230) to
be mounted using a standard 35mm speaker stand or a 35mm
distance bar when used in conjunction with one of the SX Series
Subwoofers fitted with a pole mount insert.
The T12POLERIG can be fitted to the top or the bottom of the
cabinet allowing systems to be mirrored with the high frequency
horn either to the left or the right.
T12GRID
The T12GRID is used to vertically array TORUS for up to 6 cabinets.
Cabinets may be flown from the T12GRID inverted allowing stereo
arrays to be mirrored with the high frequency horn either to the left
or the right.
TORUS USER GUIDE V1.0
Copyright © 2021 Martin Audio Ltd.
SBAR
The SBAR allows a single cabinet to be flown in "landscape" mode.
5 holes give various angle options for up and down tilt. An adaptor
is included for truss mounting.
The SBAR can be fitted to the top or the bottom of the cabinet
allowing stereo systems to be mirrored with the high frequency horn
either to the left or the right.
T12HRIG
The T12HRIG is used to horizontally array TORUS for up to 6
cabinets. A single HRIG can be used to suspend up to 3 T12
cabinets and arrays consisting of 4 to 6 cabinets use 2 x T12HRIG.
9
TORUS USER GUIDE
Advertisement
Table of Contents
