Table of Contents
Advertisement
TORUS USER GUIDE
Portrait Deployment
TORUS combined in portrait creates a horizontal array. In this mode the combined fixed angle of the cabinets becomes the horizontal
dispersion, and the flexible dispersion can be adjusted in the vertical.
Changing Horn Dispersion
To adjust the angle, rotate the thumbwheels at the top and bottom of the grille. Each side is adjusted in 15° increments showing either
"45°" or "30°". If both sides are at their widest position the total dispersion is 90°, by adjusting one side down by 15° from 45° to 30°
the dispersion will be 75° asymmetrical with a bias to the left or right depending on which side of the horn you have adjusted. With both
set to the minimum angle the dispersion reverts to a symmetrical 60° Indicators on the thumbwheels show which angle the horn is set to.
TORUS USER GUIDE V1.0
8
Copyright © 2021 Martin Audio Ltd.
Advertisement
Table of Contents
