AEG MC 4613 DVD Instruction Manual & Guarantee page 59

System settings
05-MC 4613 DVD AEG_GB_new.indd 59 05-MC 4613 DVD AEG_GB_new.indd 59
TV-System
Match the output of the DVD-Player to the colour transfer system of
your replay device. The following options are available:
NTSC: A system primarily used in North America.
PAL: A system commonly used in Europe.
AUTO: Select this setting if your replay device is a multi-system unit.
Screen saver
The player is able to display a still image for any time on the screen. This
can cause damage to the screen. It is therefore recommended to activate
the screen saver. The following options are available:
ON: The screen saver is activated (default setting).
OFF: The screen saver is deactivated.
Video output
With the option „Video" you determine the signal format to be trans-
mitted to your replay device. Choosing the right signal format depends
on the type of connection and the replay device (see also the operating
manual of the replay unit).
Older replay units normally only support the so-called interlaced scan-
ning method („INTERLACE"). With this method the image is composed by
means of two successively built up fi elds. The fi rst fi eld thereby consists
of the even screen lines, the second one of the odd ones. With the „pro-
gressive" Video signal, in contrast, the complete image is build up in a
single process. The thus achieved image quality is normally much higher.
The following options are available:
INTERLACE-YUV: Choose this option if your replay device does not
support progressive signals and is connected to the DVD-Player by
means of a Component-Video cable.
TV-RGB: Choose this option if your replay device supports progres-
sive signals and is connected to the DVD-Player by means of an
S-Video cable or a Composite-Video cable.
P-SCAN YPBPR: Choose this option if your replay device supports
progressive signals and is connected to the DVD-Player by means of
a Component-Video cable.
S-VIDEO: Choose this option if your replay device supports pro-
gressive signals and is connected to the DVD-Player by means of an
S-Video cable.
NOTE:
If the DVD-Player is connected to the replay device by means of
a Composite-Video cable or a SCART-cable, you may choose any
setting from this menu.
English
59
12.09.2008 9:21:37 Uhr 12.09.2008 9:21:37 Uhr