AEG MC 4613 DVD Instruction Manual & Guarantee page 53

Enlarging a screen section
Changing the viewing angle
Adjusting the volume
Creating a playlist (CD/DVD)
Fig. CD
Fig. DVD
05-MC 4613 DVD AEG_GB_new.indd 53 05-MC 4613 DVD AEG_GB_new.indd 53
3. Press the „PLAY/PAUSE
mal" replay when the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM button (Fig. 3/10) to change the screen section. Press
the button several times to select the suitable zoom factor or to return
to the original zoom factor.
NOTE:
With the cursor buttons (Fig. 3/31) you can move through the zoomed
image.
Some DVDs off er the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/28) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message „INVALID
KEY" will be displayed.
Repeat pressing the the button to choose a diff erent viewing angle, or
to return to the original viewing angle.
Press the VOLUME + button (Fig. 3/17) to increase the volume.
Press the VOLUME - button (Fig. 3/17) to reduce the volume.
NOTE:
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you
may also have to change the volume of the playback device.
It is possible that you may not wish to play the titles in the same order
that they are to be found on the DVD. The function „Create Playlist" you
can create your own playing order.
To do this, proceed as follows:
1. Press the PROG button (Fig. 3/1). A table is displayed. Here you can
enter the desired order of tracks (in the case of CDs/MP3 CDs) or
chapters/titles (in the case of DVDs).
NOTE:
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new DVD.
2. Use the Cursor Buttons (Fig. 3/31) to navigate in the table.
3. Enter the desired title and chapter at the relevant position in the
table. Use the Numerical Buttons (Fig. 3/33) for this purpose.
4. Use the Cursor Buttons (Fig. 3/31) to select the command "PLAY" at
the bottom of the screen to save the input.
5. Press the ENTER button (Fig. 3/9) on the remote control to confi rm
this command.
English
II" button (Fig. 3/24) to restart the "nor-
53
12.09.2008 9:21:36 Uhr 12.09.2008 9:21:36 Uhr