Download Print this page

Playing Media - AEG MC 4613 DVD Instruction Manual & Guarantee

Dvd system

Advertisement

Available languages

Available languages

Terminology
Using the remote control
Loading a CD/DVD
Understanding the
onscreen CD-menu
05-MC 4613 DVD AEG_GB_new.indd 49
05-MC 4613 DVD AEG_GB_new.indd 49
Input Not Possible
If an input or function selected by you is not possible, the words „INVA-
LID KEY" appear on the screen.
Track: "Track" is the designation for sections on an Audio-CD. This
may be a song, the set of a symphony, etc.
Title/Chapter: Video-DVDs are divided into "Title" and „Chapters". A
„Title" may be e.g. a particular fi lm, the „Chapters" may be subsec-
tions of this fi lm.
MPEG4: Your DVD player is also suitable for playing back fi les that
have been compressed using the MPEG-4 system (short for Moving
Picture Experts Group-4). MPEG-4 is a compression method by
means of which large quantities of data can be reduced without any
noticeable loss of picture and sound quality.
NOTE:
It is not possible to guarantee full compatibility with all of the com-
pression methods used worldwide, particularly when more than one
soundtrack or subtitles are involved. Also MPEG 4 fi les with integrated
special functions such as a menu, subtitles etc. are not always sup-
ported. This is no malfunction of the player.

Playing media

NOTE:
If the device is not already turned to DVD mode, switch it to DVD
mode by pressing the FUNCTION button (Fig. 3/8) in den DVD Modus.
You transmit commands to the DVD-Player via remote control. It is thus
important to point the end of the remote control towards the DVD-
Player.
1. Press the remote control button OPEN/CLOSE (Fig. 3/2). The CD/DVD tray
opens.
2. Place the CD/DVD on the tray.
3. Press the remote control button OPEN/CLOSE (Fig. 3/2) again. The
CD/DVD tray closes. The display (Fig. 1/1) fi rst shows „LOAd". After a
short while the type of the loaded medium is displayed (e.g. „DVD").
When playing CDs the following status information is displayed on screen:
Media type (1), e.g. "CD".
Current track/total number of tracks (2).
Audio output (3): If the MUTE-button (Fig. 3/20) on the remote
control was pressed, the audio output is prevented. The word „Mute"
appears on the screen.
Repeat (4):
„x": no repeat.
„1": the current track is repeated.
„A": all tracks are repeated.
English
49
12.09.2008 9:21:35 Uhr
12.09.2008 9:21:35 Uhr

Advertisement

Chapters

loading