Setting Up And Connecting - AEG DVD 4525 USB Operation Manual

Intended use
Defect
Unpacking
Setting up
05-DVD 4525 AEG - GB 43
The DVD-Player is solely intended for the following tasks:
Playing of Video DVD/Video CD.
Playing of Audio-CD,
Any other use is considered non-intended use and is prohibited.
If the machine should become defective at some point:
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to avoid
hazards.
Should fl uid have seeped into the player or if the player has been dropped
down or damaged in any other way, the player must be examined by
an authorized dealer. Disconnect the player from the power supply and
consult an authorized dealer.

Setting up and connecting

Unpack the appliance and all accessories and check that the contents are
complete.
ATTENTION:
Always transport/send the player in its original packaging to prevent it from
being damaged. Keep the packaging for this purpose. Dispose of unneces-
sary packaging material in accordance with the regulations applicable in your
country.
NOTE:
Get in touch with your dealer immediately if you notice damage caused by
transport.
1. Place the player on a stable, heat resistant, horizontal and level surface.
Keep a distance of at least 10 cm from walls and objects.
2. Connect the device to a properly installed power socket.
Setting up and connecting Themen
43
24.04.2007, 15:41:49 Uhr