Download Print this page
3onedata IES7110 Series Quick Installation Manual

3onedata IES7110 Series Quick Installation Manual

Managed industrial ethernet switch

Advertisement

Quick Links

IES7110 Series
Managed Industrial Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package checklist】
Please check whether the package and accessories are intact
while using the switch for the first time.
1.
Industrial Ethernet switch
3.
Quick installation guide
5.
DIN-Rail mounting attachment
7.
Power line (standard
configuration of AC equipment)
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
This series are 100M/Gigabit managed DIN-Rail industrial
Ethernet switch. Models as follows:
Model I.
IES7110-2GS-P (12~48VDC) (2 Gigabit SFP + 8
100M copper ports + 2 12~48VDC power supplies)
Model II. IES7110-2GS-P (100~240VAC/DC) (2 Gigabit
SFP + 8 100M copper ports + 1 100~240VAC/DC power
supply)
Model III. IES7110-2GS-2F-P (12~48VDC) (2 Gigabit SFP +
6 100M copper ports + 2 100M fiber ports + 2 12~48VDC
power supplies)
Model IV. IES7110-2GS-2F-P (100~240VAC/DC) (2 Gigabit
SFP + 6 100M copper ports + 2 100M fiber ports + 1
100~240VAC/DC power supplies)
Model V. IES7110-2GS-4F-P (12~48VDC) (2 Gigabit SFP +
4 100M copper ports + 4 100M fiber ports + 2 12~48VDC
power supplies)
Model VI. IES7110-2GS-4F-P (100~240VAC/DC) (2 Gigabit
SFP + 4 100M copper ports + 4 100M fiber ports + 1
100~240VAC/DC power supply)
Model VII. IES7110-3GS-P (12~48VDC) (3 Gigabit SFP + 7
100M copper ports + 2 12~48VDC power supplies)
Model VIII.
Nanshan
District,
copper ports + 7 100M copper ports + 2 12~48VDC power
supplies)
【Panel design】
Rear view, Top view and Bottom view
2.
Certification
4.
Warranty card
6
CD
IES7110-3GT-P (12~48VDC) (3 Gigabit
Front view of DC products
Model I
Model III
Model VII
Front view of AC products
Model V
Model VIII

Advertisement

loading

Summary of Contents for 3onedata IES7110 Series

  • Page 1 Model II. IES7110-2GS-P (100~240VAC/DC) (2 Gigabit SFP + 8 100M copper ports + 1 100~240VAC/DC power supply) IES7110 Series Model III. IES7110-2GS-2F-P (12~48VDC) (2 Gigabit SFP + Managed Industrial Ethernet Switch 6 100M copper ports + 2 100M fiber ports + 2 12~48VDC...
  • Page 2 Tips: Insert a little to the bottom, lift upward and then insert to the top. Step 3 Check and confirm the product is firmly installed on DIN-Rail, and then mounting ends. 【Disassembling DIN-Rail】 Step 1 Power off the device. Step 2 After lift the device upward slightly, first shift out the top of DIN-Rail mounting kit, and then shift out the bottom of DIN-Rail, disassembling ends.
  • Page 3 Relay terminal blocks are a pair of normally Power supply is connected and open contacts in the alarm relay of the device. PWR/P1/P running normally They are open circuit in the status of normal no Power supply is disconnected and alarm, and closed when any warning message occurs.
  • Page 4 10/100Base-T(X) self-adapting Protection grade IP40 (metal shell) RJ45 port, full/half duplex 100M copper port self-adaption or specified operating mode, support MDI/MDI-X self-adaption 100Base-FX, optional SC/ST/FC 100M fiber port port CLI command management port Console port (RS-232), RJ45 2 pins 7.62mm pitch terminal blocks, support 1 relay alarm Alarm interface information output, the current...

This manual is also suitable for:

Ies7110-2gs-pIes7110-2gs-2f-pIes7110-2gs-4f-pIes7110-3gs-pIes7110-3gt-p