BMW HP4 RACE Rider's Manual page 50

5
NOTICE
Washer must be fitted between
48
steering damper and fork
bridge.
Steering damper on fork
bridge
Thread-locking compound:
Loctite 243, Medium-firm
z
14 lb/ft (19 Nm)
Install left stub handlebars 2
and right stub handlebars 3 on
fork leg.
Provisionally tighten bolts 1.
Install top fork bridge 4.
Install steering head nut 3 and
tighten to specified torque.
Top fork bridge on head
tube
59 lb/ft (80 Nm)
Do not tighten bolts 2.
Fit bolts 1, but do not tighten
yet.
Attach retainer 2 and fit bolt 1.
Clutch cable holder on
top fork bridge
Joint compound: Lubricate
thread, Optimoly TA
2 lb/ft (3 Nm)