Starting Up And Quitting The Fa-B30 Software; Start Up - Casio FA-B30 User Manual

Starting Up and Quitting
the FA-B30 Software

Start Up

You do not need to perform this procedure if the FA-B30 icon is already in the status
area, which indicates the FA-B30 Software is already running.
Windows status area (normally located in the lower right corner of your screen)
FA-B30 icon (Indicates Label Software is running.)
To start up the FA-B30 Software
1
On the Windows desktop, double-click the Basic Label Printing
Software FA-B30 icon.
This starts up the FA-B30 Software and displays the Input Panel and the preview
window. It also causes the FA-B30 icon to appear in the Windows status area.
• You can also start up by clicking the following: Start ➜ All programs ➜ CASIO ➜
Basic Label Printing Software FA-B30 ➜ Basic Label Printing Software
FA-B30. What you need to click may be different, depending on the folder where
you installed the FA-B30 Software.
➜
Double-click
FA-B30 icon
13
Preview window
Input Panel