Casio CW-L300 User Manual page 3

2.
Select the language of the version you want to install, and then click
OK.
3.
Click Next.
This displays the "Preceding License Agreement".
Be sure to read the "Preceding License Agreement".
4.
After reading the agreement, click Yes.
This displays the "Software End User License Agreement".
Be sure to read the "Software End User License Agreement".
5.
After reading the agreement, click Yes.
This displays the Choose Destination Location screen.
6.
Check the install destination location, and then click Next.
• If you want to change the installation location, click Browse.
• Clicking Next starts installation.
7.
The InstallShield Wizard Complete screen will appear after
installation is complete. Click Finish.
This will advance automatically to installation of FA-B30 Software.
8.
The installer will start up automatically, and display the screen shown
below. Click Next.
9.
This displays the "Software End User License Agreement". After
reading the agreement, click Yes.
• Be sure to read the "Software End User License Agreement".
Clicking Yes will display the Choose Destination Location screen.
10.
Check the install destination location, and then click Next.
If want to change the installation location, click Browse.
you
•
• Clicking Next displays the Option Selection screen.
11.
Select the options you want, and then click Next.
• Clear the check box of any option you want to deselect.
• The information presented in this manual assumes that the check boxes of
all the options are selected.
This displays the Printer Selection screen.
12.
After confirming that CW-L300 is selected, click Next.
This displays the Select Program Folder screen.
13.
Normally, you should just click Next without changing anything.
This displays the Start Copying Files screen.
14.
Normally, you should just click Next without changing anything.
The InstallShield Wizard Complete screen will appear after installation is
complete.
15.
Click Finish.
Check to make sure that everything was installed correctly.
• DISC TITLE PRINTER Application: If you installed this application following the
above steps, there should be a DISC TITLE PRINTER shortcut icon on your
Windows desktop.
• FA-B30 Software: If you installed this application following the above steps, there
should be a Basic Label Printing Software FA-B30 shortcut icon on your Windows
desktop. If you disabled display of shortcut icons on the Option Selection screen,
you will need to navigate to the location where you installed the software to see if
they are present.
Installing Adobe Reader
Your computer must have Adobe Reader or Acrobat Reader 4.0 or higher installed in
order to view the PDF file user documentation for the DISC TITLE PRINTER or
FA-B30 Software. If your computer does not have one of these readers installed,
perform the following procedure to install Adobe Reader 6.0 from the CD-ROM.
■ To install Adobe Reader
1.
Place the CD-ROM that comes with the printer into the CD driver of your computer.
2.
When the installer screen for the printing software appears, click Cancel to
cancel it.
3.
Navigate to the Adobe Reader folder on the CD-ROM, where you will find fold-
ers whose names indicate the language version: English, French, German, Ital-
ian, Spanish. Open the folder whose language matches that of your computer
operating system. In the folder, open the file named Readme_casio, and care-
fully read its contents. After you are finished, close the Readme_casio file.
Be sure to read the entire contents of the Readme_casio file.
4.
Inside the folder where the Readme_casio is located, double-click the file named
AbdeRdr60_xxx_full.exe.
• The "xxx" portion of the file name will be a three-letter code indicating the
language of the file contents.
Double-clicking the file will start installation of Adobe Reader.
Follow the instructions that appear on your computer screen to complete instal-
lation.