Hypex Electronics NC400 Mono kit Quick Start Manual

Congratulations on the purchase of your NC400
Mono kit. Soon you will experience the highest
quality of music reproduction and best of all: you
can build it yourself!
To ensure the best performance please read this
manual first. It contains tips and tricks to guide
you through the process of building your own
NC400 mono block.
Warning: This kit operates at mains voltage and
carries hazardous voltages at accessible parts.
For safety instructions refer to the datasheets on
our website.
Hypex Electronics BV
Kattegat 8
9723 JP Groningen, The Netherlands
+31 50 526 4993
sales@hypex.nl
www.hypex.nl
The best DIY amplifier, now made easy!
Your NC400 Mono kit contains:
1x NC400
1x SMPS600N400
1x Case Hypex DIY mono
1x Mains input + ON/OFF switch
2x 5 AT fuse
1x Binding posts (red and black)
1x XLR to NC400 cable + PCB-XLR chassis
1x Speaker wires (twisted red/black)
1x Internal mains wires
1x Protective earth cable
This manual
What you need to build it:
Screwdriver PH and small FLAT head
2,5mm Allen key
Cutting pliers
Optional (supply by yourself):
Glue to fix mains input and switch
o
Please check the content of your kit before you
start.
NC400
Mono kit