Advertisement
Quick Links
Congratulations on the purchase of your NC400
Mono kit. Soon you will experience the highest
quality of music reproduction and best of all: you
can build it yourself!
To ensure the best performance please read this
manual first. It contains tips and tricks to guide
you through the process of building your own
NC400 mono block.
Your NC400 Mono kit contains:
1x NC400
1x SMPS600
1x Case Hypex DIY mono
1x Mains input + ON/OFF switch
2x 5 AT fuse
1x Binding posts (red and black)
1x NC400 to XLR
1x Speaker wires (twisted red/black)
1x Internal mains wires
1x Protective earth cable
This manual
o
Please check the content of your kit before you
start.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hypex Electronics NC400 Mono Kit
Summary of Contents for Hypex Electronics NC400 Mono Kit
- Page 1 Your NC400 Mono kit contains: 1x NC400 1x SMPS600 1x Case Hypex DIY mono 1x Mains input + ON/OFF switch 2x 5 AT fuse 1x Binding posts (red and black) 1x NC400 to XLR 1x Speaker wires (twisted red/black) 1x Internal mains wires...
- Page 2 Let’s get started Before your start assembling this kit please mind the following: We expect you have basic knowledge of electronics and you are aware of the dangers related to electricity. If you do not feel confident, please ask someone who has this knowledge to assist you. 1: Place amplifier and supply 2: Place the binding post and XLR Mount the NC400 signal wire according to the drawing, use the...
Need help?
Do you have a question about the NC400 Mono Kit and is the answer not in the manual?
Questions and answers