Page 1
Item #20555 1", 1.5", 2", 2.5" PUNCH & BEAD DIE SET INSTRUCTIONS...
Page 2
The EASTWOOD PUNCH & BEAD DIE SETS will punch a clean hole and produce a smoothly radiused, raised bead in aluminum and mild steel in a choice of 4 sizes. This tool is designed to be used on single thickness sheet metal of thicknesses noted below.
Page 3
• Tighten the Bolt by hand until resistance is felt. • Using a wrench or socket, continue to turn the Bolt until the material is pierced and the feature is formed. • Disassemble tool in reverse order. To order parts and supplies: 800.345.1178 >> eastwood.com...
Page 4
2-1/2" Punch & Flare Die Set If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/20555manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.345.1178...