Using The Laser Without A Tripod - Powerfix Profi KH3301 Operating Instructions Manual

If you direct the laser beam in horizontal adjustment into a corner,
the laser beams on both walls and in the corner are at exactly the same
distance from the floor (see Fig. 2: 3 Point measurement).

Using the laser without a tripod

• Place the tape measure on a surface that is as level as possible.
• Press the On/Off switch
• Adjust the tape measure with the aid of the foot screws
the bubble in the spirit level
If you screw out the foot screw
line somewhat higher.
• Direct the laser line onto the desired wall.
• Push the crossline lens
want to project a vertical and horizontal line.
Fig. 1: Horizontal and vertical
Fig. 2: 3 Point measurement
to activate the laser.
a
lies centrally between the markings.
t
a little further, you can project the laser
y
down in front of the laser exit opening when you
i
- 37 -
measurement
y
/ such that
r