Table of Contents
Advertisement
TROUBLESHOOTING
Symptom
No power
Sudden power failure
indicator on LCD
No recording when shutter
button is pressed
Auto Focus cannot focus
the image.
Probable Cause
1. Battery not loaded correctly.
2. Dead battery
3. Wrong AC adapter
1. Auto Power Off
2. Low battery power
Battery is about to go dead.
1. The Power/Function switch is in the PLAY posi-
tion.
2. Flash unit is charging.
3. The message "MEMORY FULL" is on the moni-
tor screen.
4. Insufficient memory card capacity or no memory
card loaded in camera.
1. Lens is dirty.
2. The object you want to focus is not in the focus
frame.
3. Conditions make it impossible to obtain proper
focus.
4. Camera is unsteady or shaking.
TROUBLESHOOTING
Action
1. Correctly load a battery (page E-41).
2. Replace the battery with a new one (page E-41).
3. Use only the specified AC adapter or AC
adapter/charger.
1. Turn power back on.
2. Replace the battery with a new one (page E-41).
Replace the battery with a new one (page E-41).
1. The Power/Function switch is in the REC posi-
tion.
2. Wait until flash unit charging is finished.
3. Delete images you no longer need from camera
memory.
4. Load a memory card.
1. Clean off the lens.
2. Aim the camera so the object you want to focus
is in inside the focus frame.
3. Switch to the Manual Mode and focus manually.
4. Use a tripod to steady the camera.
E-115
Advertisement
Table of Contents
