Table of Contents
Advertisement
POWER SUPPLY
• Be sure to turn off power before connecting or disconnect-
ing the adapter.
• Always turn camera power off before disconnecting the AC
adapter, even if the camera has batteries installed. If you
don't, the camera will turn off automatically when you dis-
connect the AC adapter. You also run the risk of damaging
the camera whenever you disconnect the AC adapter with-
out first turning power off.
• The AC adapter may become warm to the touch after ex-
tended periods of use. This is normal and is not cause for
alarm.
• After using the camera, turn it off and unplug the adapter
from the AC outlet.
• The camera automatically switches over to AC adapter
powered operation whenever the AC adapter is plugged
into the camera.
• Always use the AC adapter to power the camera whenever
it is connected to a computer.
E-46
Power Save Settings
The settings described below let you specify sleep and auto
power off trigger times that help to conserve valuable battery
power.
SLEEP .................. The monitor screen enters a sleep state
if no operation is performed for a speci-
fied amount of time in the Record Mode.
Pressing any button restores full power.
You can specify 30 seconds, one
minute, or two minutes before the sleep
state is triggered, or you can turn off this
setting entirely.
AUTO
POWER OFF ........ Auto Power Off turns off camera power if
no operation is performed for five min-
utes in the PLAY mode, or for two or five
minutes in the REC mode.
• AUTO POWER OFF takes priority when both SLEEP and
AUTO POWER OFF are set for a 2-minute trigger time.
This means camera power turns off if no operation is per-
formed after two minutes.
Advertisement
Table of Contents
