Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
Manual Focus
Manual Focus lets you manually adjust the focus of an image.
1.
Pressing down the Power/Function switch,
slide it to REC.
2.
Press
MF indicator appears on the monitor screen.
• Each press of
the following sequence: Auto Focus
(
)
Infinity (
3
. While "
" is flashing on the monitor screen,
use [ ], [ ] or [ ], [ ] to focus the image.
[ ], [ ] ............ Narrows the focus range.
[ ], [ ] ............ Widens the focus range.
• If you do not perform any focus operation for about
two seconds, the "
• After "
" stops flashing, you can use [ ] and [ ] to
adjust exposure compensation (EV).
• If "
" stops flashing before you have a chance to
focus, press
• Pressing
changes the focus mode to Infinity.
E-64
a number of times until the
cycles the focus mode in
Manual Focus
)
Macro ( ).
" indicator stops flashing.
to make "
" flash again.
while "
" is flashing
4.
Compose the image and then record it.
• The Operation lamp and the Auto Focus frame do not
appear while manual focus is in use.
Advertisement
Table of Contents
