Table of Contents
Advertisement
CONNECTING TO OTHER EQUIPMENT
Connecting to a Computer
The following accessories are included with the camera to
make it easy for you to connect to a computer to transfer and
manage your images.
• USB cable
• USB driver software (on CD-ROM)
• Data Transfer Cable
• Photo Loader application (on CD-ROM)
USB Port Connections
The camera's USB port and accessories make it easy to
connect to a computer equipped with a USB port. First install
the USB driver software that comes bundled with the camera
on your computer, and then use its special USB cable to
make the connection. Once connected, you can view images
on your computer's display and store images on its hard
disk.
• See the separate installation manual for information about
how to install the driver software on your computer.
CONNECTING TO OTHER EQUIPMENT
System Requirements
Windows
• IBM PC/AT or compatible com-
puter pre-installed with Windows
Me/98 or upgraded from Win-
dows 98 to Windows 2000/Me
• 486 or higher CPU (Pentium
recommended)
• CD-ROM drive (for installa-
tion)
• Keyboard and mouse or
equivalent input device
• USB port
* Operation is not guaranteed un-
der the following conditions.
• A computer upgraded from Win-
dows 95 or Windows 3.1 to Win-
dows Me/98
• A computer upgraded from Win-
dows 95 or Windows NT to Win-
dows 2000
* Operation under Windows 95/3.1
or Windows NT is not supported.
* In the case of Windows 2000,
proper operation is guaranteed for
Windows 2000 Professional only.
* The USB driver may not run cor-
rectly under certain system con-
figurations.
* The USB driver may not run correctly under certain hard-
ware configurations.
Macintosh
• Mac OS 8.5 or higher, Mac
OS 8.1 with USB system ex-
tensions (iMac Update 1.0 is
required)
• Power PC G3
• CD-ROM drive (for installa-
tion)
• Keyboard and mouse or
equivalent input device
• Available USB port
E-105
Advertisement
Table of Contents
