Table of Contents
Advertisement
When things don't go right...
Troubleshooting
Problem
Power Supply
Power does not turn
on.
The camera
suddenly powers
down.
Power will not turn
off. Nothing
happens when a
button is pressed.
Charging
The operation lamp
does not light red
and the battery
won't charge.
Image Recording
Image is not
recorded when the
shutter button is
pressed.
Auto Focus does
not focus properly.
Possible Cause and Recommended Action
1)The battery of new camera is not charged. Charge the
battery before using the camera.
2)The camera battery may be dead. Charge the battery (page
19). If this does not resolve the problem, contact your retailer
or a CASIO authorized service center.
1)The camera is designed to turn off automatically after no
operation is performed for about five minutes. Turn power
back on.
2)The battery may be dead. Charge the battery (page 19).
3)The camera's protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Hold down the power button for at least 10 seconds to reset the
camera.
1)Unplug the USB cable from the camera and then plug it back
in again.
2)Make sure the camera is turned off when you connect the
USB cable. Charging may not start if you connect the USB
cable while power is turned on.
1)If the camera is in the PLAY mode, touch "
the REC mode.
2)If the message "Memory Full" appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)You may be moving the camera when shooting. Place the
camera on a tabletop or some other stable surface, or find
some way to fix the camera in place.
4)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
147
" (REC) to enter
Appendix
Advertisement
Table of Contents
