Table of Contents
Advertisement
CONNECTING TO OTHER EQUIPMENT
USB Port Connection
Computer
USB port
IMPORTANT!
• Whenever connecting the USB cable to the camera,
make sure the arrow mark on the plug is aligned prop-
erly with the arrow mark on the side of the camera's
terminal.
• Plug the USB connectors into the ports as far as they
will go. Incorrect connection can result in improper op-
eration.
• The camera is not supplied power by the USB cable.
Be sure to use the AC adapter to power the camera
whenever using a USB cable connection.
• Never disconnect the USB cable while a data commu-
nication operation is in progress. Doing so can corrupt
memory data.
E-106
USB cable
Small
Large
USB port
• Connecting the camera to a computer with the USB
cable causes the "USb" to appear in the camera's indi-
cator display. This simply means that the cable is con-
nected but does not mean that the camera is being
recognized by the computer as an external storage
device. Perform the required operation on your com-
puter to check whether the camera is being recog-
nized by the computer as an external storage device.
• USB data communication becomes enabled when-
ever you connect the USB cable, regardless of
whether the camera is in the PLAY mode or REC
mode.
• Disconnect the USB cable after you are finished with
data communication.
• You cannot turn off the camera while the USB cable is
connected. Disconnect the USB cable first when you
want to turn off the camera.
Data Transfer Cable Connection
You can use the Data Transfer Cable to connect to your per-
sonal computer through the camera's DIGITAL terminal.
Then you save images on your computer's hard disk using
the Photo Loader application.
• See the separate installation manual for information about
how to install Photo Loader on your computer.
Advertisement
Table of Contents
