Connecting The Camera To A Computer (Wi-Fi Connection) - Casio D'Z IMAGE DERMOCAMERA DZ-D100 User Manual

Connecting the Camera to a Computer
(Wi-Fi connection)
This camera is equipped with a Wi-Fi (wireless LAN) connection function.
Connecting this camera to a computer via Wi-Fi enables you to transfer
photographed images to the computer. To use the Wi-Fi connection, you must install
the D'z IMAGE Viewer image management software on your computer.
This product includes built-in designated wireless equipment that has received a
certificate of construction type (certificate no. 007-AH0009) under Japanese Radio
Law.
IMPORTANT!
• Depending on the version of the Windows OS installed on your computer and the
amount of available storage, you may not be able to save videos or still images on
your computer. Once images have been received on your computer, check that
they have been saved on the computer.
• You cannot transfer images shot on other cameras.
• Using a memory card equipped with a Wi-Fi function in this camera could cause
problems.
NOTE
• When you use the Wi-Fi function, you will consume more power than usual. Only
use Wi-Fi when there is plenty of charge in the battery.
. Install the image management software on your computer.
Install the dedicated D'z IMAGE Viewer from the website below.
https://dz-image-store.casio.jp/dl/
. Software system requirements
To install the D'z IMAGE Viewer on your computer, the following operating
environment is recommended.
Be sure to check your computer system beforehand.
OS: Windows 10, 64-bit
• D'z IMAGE Viewer is dedicated Windows OS software. It will not run on MacOS.
• The above system requirements are the recommended environment only and do
not guarantee that the software will run.
IMPORTANT!
• The software functions and system requirements are subject to change without
notice.
Connecting the Camera to a Computer
47
(Wi-Fi connection)