Connecting To A Computer - Casio QV-3000Ir User Manual

Connecting to a Computer

The following accessories are included with the camera to
make it easy for you to connect to a computer to transfer and
manage your images.
• USB cable
• USB driver software (on CD-ROM)
• Data Transfer Cable
• Photo Loader application (on CD-ROM)
USB Port Connections
The camera's USB port and accessories make it easy to
connect to a computer equipped with a USB port. First install
the USB driver software that comes bundled with the camera
on your computer, and then use its special USB cable to
make the connection. Once connected, you can view images
on your computer's display and store images on its hard
disk.
• See the separate installation manual for information about
how to install the driver software on your computer.
CONNECTING TO OTHER EQUIPMENT
System Requirements
• IBM PC/AT or compatible
• 486 or higher CPU (Pentium
• CD-ROM drive (for installa-
• Keyboard and mouse or
• Available USB port
* Proper operation is not guaranteed
* This USB driver does not run un-
* In the case of Windows 2000,
* The USB driver may not run correctly under certain hard-
ware configurations.
E-100
Windows
computer pre-installed with
windows 2000 or Windows 98,
or pre-installed with Windows
98 and upgraded to Windows
2000
recommended)
tion)
equivalent input device
under the following conditions.
• A computer upgraded from
Windows 95 or Windows 3.1 to
Windows 98
• A computer upgraded from
Windows 95 or Windows NT to
Windows 2000
der Windows 3.1, Windows 95 or
Windows NT.
proper operation is guaranteed for
Windows 2000 Professional only.
Macintosh
• Mac OS 8.5 or higher, Mac
OS 8.1 with USB system
extentions (iMac Update 1.0
is required)
• Power PC G3
• CD-ROM drive (for installa-
tion)
• Keyboard and mouse or
equivalent input device
• Available USB port