Vitek VT-3457 W Instruction Manual page 7

ENGLISH
3. To resume playback press the PLAY/PAUSE
button once again. Playback will start from
the point of pausing.
4. To stop playback press the STOP button, no
matter whether the track was in the playback
mode or in the pause mode. Total number of
tracks will appear on the LCD-display.
5. To switch off the unit, set the operating mode
switch to the "OFF" position.
Fast rewind/fast forward, moving to the
next/previous track
In the playback or pause mode when press-
ing the SKIP/SEARCH buttons you can move to
the next/previous track or to the beginning of
the current track. To move to the previous track
press the SKIP/SEARCH buttons twice.
In the playback mode press and hold the SKIP/
SEARCH buttons to fast forward or fast reward
correspondingly, sound will be played back bro-
kenly.
Repeat modes
In the playback mode to repeat one track press
the MODE button once, the "REP" symbol will
appear on the LCD-display. The selected track
will be played back without interruption.
To repeat all tracks on the disc press the MODE
button twice, the "
the LCD-display. The disc will be played back
without interruption.
To cancel the repeat mode, press the MODE but-
ton, until the repeat symbol disappears.
Random playback
You can playback all the tracks on the disc in a
random order. In the stop mode, press the MODE
button thrice, the "RANDOM" symbol will ap-
pear on the LCD-display and all the tracks will be
3457IM.indd 6 3457IM.indd 6
" symbol will appear on
played back in a random order. To cancel ran-
dom playback press the MODE button, until the
repeat symbol disappears.
Programmed playback
You can program playback of tracks (max. 20) at
the desired order.
1. When the playback of the disc is stopped,
press the PROGRAM button once. The "PRO-
GRAM" symbol and the "P01" symbol will be
flashing on the LCD-display.
Select the desired track, successively press-
ing the SKIP/SEARCH buttons. The corre-
sponding tracks numbers will be displayed.
To store the desired track in memory press
the PROGRAM button.
2. Repeat the above procedure till all the desired
tracks will be programmed. You can store 20
tracks in memory.
Note: Every time when pressing the SKIP/
SEARCH buttons to remind you the number of
the last programmed track will be displayed.
After you finish the programming, the "PRO-
GRAM" and "_ _ _" will be flashing on the LCD-
display.
3. To playback programmed tracks press the
PLAY/PAUSE button, the " " and "PRO-
GRAM» symbols will appear on the LCD-dis-
play.
4. To view programmed tracks in the stop mode
press the PROGRAM button once, then press
the SKIP/SEARCH buttons. The number of
the first programmed track will appear on
the LCD-display. To view the following pro-
grammed tracks repeat this procedure.
5. To cancel programmed playback in the stop
mode press the STOP button once or open
the disc slot lid. The "PROGRAM" symbol will
disappear.
6
13.11.2009 9:59:23 13.11.2009 9:59:23