Bass Boost; Basic Functions - Vitek VT-3457 W Instruction Manual

to the AUX IN jack using the audio cable 3,5 mm
Jack - 3,5 mm Jack (not supplied).
Switch on the external unit, now you can listen
to records via the speakers of your cassette re-
corder.
Connection of the earphones
To listen to the music via earphones (not sup-
plied) connect them to the PHONES JACK. Set
the desired volume level using the VOLUME con-
trol. When connecting the earphones, the speak-
ers will switch off automatically.
Attention! Do not use high volume while using
the earphones. Doctors do not recommend con-
tinuous using of earphones.

BASS BOOST

For low-frequency
BASS BOOST switch to the "ON" position.
To switch on the low- frequency amplification set
the BASS BOOST switch to the "OFF" position.

BASIC FUNCTIONS

Attention! In order to save energy always set
the operating mode switch to OFF position, when
you do not use the unit.
Radio stations reception
1. Set the operating mode switch to RADIO posi-
tion.
2. Select the desired range: FM, AM or FM ST
(FM stereo), by setting the range switch to the
corresponding position.
3. Rotate the TUNING knob to select the desired
radio station.
While tuning to the station, transferring stereo
signal, the FM ST indication will light up.
If stereo signal from FM radio station is weak,
set the band switch to the FM position to make
the sound better.
4. For better reception in FM band extend the
antenna completely and place it under the
desired angle. For reception in AM band the
cassette recorder has a built-in antenna, for
better reception in AM band, try several vari-
ants of the cassette recorder location.
5. After you finish listening to the radio set the
operating mode switch to OFF position or se-
lect another operating mode.
Disc handling
Playback of CD discs (CD-R/RW supported)
3457IM.indd 5 3457IM.indd 5
amplification, set the
Starting
Note:
Always close the discs slot lid to prevent it from
dust. Always extract the disc from the slot if it is
not being played back.
Do not open the disc slot while the disc is being
played back.
If while playing back the tracks are skipped, low-
er the volume level.
When you stop listening to CD discs, set the op-
erating modes switch to the OFF position.
1. Open the disc slot lid. Inset the disc and close
the lid. Make sure that the disc is inserted
properly – with the label upwards.
2. Select the playback mode, by setting the op-
erating modes switch to the CD position.
Note: Make sure that the disc slot lid is closed
and locked properly.
3. When the lid is closed and the disc is inside,
total number of tracks will appear on the LCD-
display.
If there is no disc in the disc slot, "
pear on the LCD-display.
If the lid of the disc slot is not closed, "_ _ _"will
appear on the LCD-display.
Play/Pause
1. To playback press the PLAY/PAUSE button,
the play back of the first track will start. The
number of the track and the " " symbol will
be displayed .
2. To pause the playback, press this button
once again, the " " symbol will be flashing
5
ENGLISH
" will ap-
13.11.2009 9:59:23 13.11.2009 9:59:23