Table of Contents
Advertisement
Replacing the Presser Foot
Removing and attaching the presser foot
holder
Remove the presser foot holder when installing a presser foot
that does not use the presser foot holder.
■ Removing the presser foot holder
a
Touch
.
The screen changes, and all keys and operation
buttons are locked (except
b
Remove the presser foot.
• For details, refer to "Replacing the presser foot" on
page 29.
c
Use the screwdriver to loosen the presser foot holder
screw.
Turn the screw toward the back of the machine
(counterclockwise).
• The presser foot holder screw can also be loosened
or tightened with the disc-shaped screwdriver.
d
Touch
to unlock all keys and buttons.
■ Attaching the presser foot holder
Touch
.
a
The screen changes, and all keys and operation
buttons are locked (except
b
Raise the presser foot lever.
Align the notch in the presser foot holder with the
c
screw.
a
30
).
).
1 Screw
2 Notch in presser foot
holder
d
Hold the presser foot holder in place with your right
hand, and then tighten the screw using the screwdriver
in your left hand.
Turn the screw toward you (clockwise).
CAUTION
• Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to break and possibly
resulting in injuries.
e
Touch
to unlock all keys and buttons.
Advertisement
Table of Contents
