R&G FI0127BK Fitting Instructions

Frame insert kawasaki z650 2017

FI0127

FITTING INSTRUCTIONS FOR FI0127BK FRAME INSERT

KAWASAKI Z650 2017

Page | 1

THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.

DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.

Please note that the way the kit is packed does not necessarily represent the way of

mounting to the bike

(

)

HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY

FOR CLARITY OF INSTRUCTIONS ONLY

Please note that in cases where kits are packed with rubber washers holding the components onto the

bolt – the rubber washers should be thrown away!

R&G Racing

Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU34 3AQ

Tel: +44 (0) 1420 89007 | Fax : +44 (0) 1420 87301 | Email: info@rg-racing.com

Table of Contents

Need help?

Do you have a question about the FI0127BK and is the answer not in the manual?

Page 1 FI0127 FITTING INSTRUCTIONS FOR FI0127BK FRAME INSERT KAWASAKI Z650 2017 Page | 1 THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of...
Page 2 FI0127 LEGEND  ITEM 1 = R&G Frame Plug (FI0127) (x2)  ITEM 2 = OEM rubber O-Ring TOOLS REQUIRED  Small flat-head screwdriver Page | 2 Left or right-hand side (as you sit on bike)  Remove the OEM Frame plug ...
Page 3 FI0127 NOTICE DE MONTAGE POUR FI0127BK INSERT DE CADRE KAWASAKI Z650 2017 Page | 3 Le kit contient les articles exposés ci-dessous, vérifier que toutes les pièces soient présentes avant de procéder au montage. La façon dont le kit est emballé ne correspond pas forcément à la façon de monter les pièces sur la moto.
Page 4 FI0127 LEGENDE  ARTICLE 1 = Prise de cadre R&G (FI0127) (x2)  ARTICLE 2 = Bague en caoutchouc d’origine OUTILS REQUIS  Petit tournevis plat Page | 4 Coté gauche ou droit (lorsqu’on est assis sur la moto)  Enlever la prise de cadre d’origine ...