Introduction - Canon JX200 User Manual

Introduction

Useful Information
Replacing a FINE Cartridge
When the ink in the FINE Cartridge starts to run out, the machine will switch to memory reception
of faxes.
See "Printing a Document in Memory" on page 34
See "Replacing a FINE Cartridge" on page 45
See "Aligning the FINE Cartridge" on page 48
One-touch and Coded Dial Numbers
You can register One-touch and Coded Dial numbers in your fax machine to make sending faxes
easier and faster.
See "Registering One-touch Speed Dialing Numbers and Names" on page 13
See "Registering Coded Speed Dialing Numbers and Names" on page 14
Different Ways to Receive Faxes
There are several different ways to receive faxes using this machine. Select the one that most
suits your needs.
See "Setting the Receive Mode" on page 29
Deleting Faxes from the Memory
When the ink level is low faxes will be received into the memory. Once 30 transmissions have
been received reception will no longer be possible, so be sure to print out and delete
unnecessary faxes from the memory.
See "Printing All Unprinted Documents in Memory" on page 35
See "Deleting All Printed Documents from Memory" on page 36
Clearing Documents and Paper Jams
In the unlikely event that your machine jams you will need to remove the jammed paper.
See "Paper Jams" on page 53
2 Introduction