Cleaning The Scanner Components - Canon JX200 User Manual

2
Use a clean, soft, dry, lint-free cloth to remove
any ink or paper debris from the interior of the
fax, especially around the four pinch rollers
(A).
Dirt and dust particles that collect on the underside
of the Printer Cover affect the quality of the
documents you copy or send.
Be careful not to touch the FINE Cartridge or its
holder.
3
When you are finished, close the Printer Cover.
Be sure to close the Printer Cover until it locks into place.

Cleaning the Scanner Components

Note
If the scanner components are dirty, the documents you send or copy will also be dirty.
Use a soft, lint-free cloth.
Caution
Do not use tissue paper, paper towels, or similar materials for cleaning.
1
Press [Maintenance].
2
Use [{] or [}] to select <CS CLEANING>.
3
Press [Start/Copy].
4
Open the Printer Cover.
5
While lifting the Scanning Unit Cover
(A), with the White Sheet (B) inside
exposed, clean the components.
Wipe with a clean, soft, lint-free cloth
moistened with water, then wipe with a clean,
soft, dry, lint-free cloth and wring out excess
water.
Caution
Do not bend the white sheet (B).
6
When you are finished, close the Printer
Cover.
Be sure to close the Printer Cover until it locks into place.
50 Routine Maintenance
(A)
(A)
(B)