Canon VB-C300 Operation Manual page 65

Toggling Toolbar Display
To toggle toolbar display ...
Select "Toolbar Display" from the
View menu bar to display or hide the
toolbar.
The toolbar is displayed if there is a check
mark before "Toolbar Display".
Setting Video Display
You can set the video display size at start up. You can also select whether or not the confirmation
message is displayed when you select the full-screen mode.
To make settings ...
1. Choose "Display Settings" from the
View menu bar.
2. The Display Settings dialog is displayed.
1 Video display size at start up
You can set the video display size at start
up.
● Use a received image size
The display size is adjusted to the size
of the first video received when the NC
Viewer is connected to the Camera.
● Use a display size below
Select from "Large", "Middle", "Small",
and "Minimum".
Overview of NC Viewer Operation
1
2
3-21