NC Viewer Operation
NC Viewer's Display Screen
The NC Viewer's display screen has the following buttons, boxes, etc.
1
1 Pause/Resume button
Pauses video. Click this button again resumes video.
2 External Device Input button
Display the external device input status. Only the administrator can use this button.
3 External Device Output button
Operate the external device output. Only the administrator can use this button.
4 Cameral Control button
Sets camera properties (e.g., camera angle).
5 Control for Administrators button
Sets the exposure and Night Mode of the camera. Only the administrator can use this
button.
6 Shade Correction button
Sets the shade correction. Only the administrator can use this button.
7 Audio button
Sets audio reception. You need to set audio settings in advance to display this button (→
P.3-16).
8 Microphone button (For the administrator)
Sets audio transmission. Only the administrator can use this button. You need to set audio
settings in advance to display this button (→ P.3-16).
9 Camera List box
Allows selecting from multiple cameras installed.
0 Administrator display
When you connect to the VB-C300 as Administrator, "Administrator" is displayed in red.
2
3
4
5
6
18
17
7
8
9
10
11
12
13
14
16
15
3-7