Canon VB-C300 Operation Manual page 40

Preset Setting Tool
● The Panorama Preview may be slightly different from the actual image. After the
presets have been set, be sure to check in the NC Viewer that the presets are
Note
correctly reflected.
● When using the manual focus, adjust the focus manually while watching the video
via the NC Viewer. After manual focusing completes, click "Get Value" to set the
preset.
● Up to 20 presets can be set.
● Changes in the preset settings are not applied to the viewer while it is connected.
Tip
● To delete the set presets, use the Restore Settings option (→ P.4-8). However,
note that settings are restored to the factory default settings.
● You can check Not shown in Viewers option (→ P.2-10) to prevent presets from
being shown in the NC Viewer.
● Setting the preset position using the digital zoom may cause the viewing angle to
be misaligned.
● It is possible to apply multiple presets and save them by clicking "Save Preset
Settings" at the end.
2-14