Starting Camera Control - Canon VB-C300 Operation Manual

Starting Camera Control

The camera cannot be controlled simultaneously by multiple users. Only the user who currently
has camera control can control the camera. You can use the backlight compensation or presets if
you have camera control.
To control the camera ...
Click "Start Control" to obtain camera control.
Camera control status window
Camera Control Status window changes as follows depending on the camera control status.
z
When you do not have camera
control
x
When video image refreshing is
temporarily paused by clicking
"Pause/Resume". Camera Control
Status window is shown in yellow.
You can select "Copy Still Image" from the File
menu bar.
Camera Control Privilege
If the Administrator gets the camera control, Authorized user cannot control the camera. Terminate
the NC Viewer or click Start/Stop Control button again to release the camera control privilege.
When the multiple Authorized user are accessing the camera, the last Authorized user who tries
to get the control gets the camera control.
Overview of NC Viewer Operation
Camera Control Status window
Displays camera control status.
Start/Stop Control button
Obtain/release Camera Control.
c
When you have camera control.
Camera Control Status window
is shown in green.
v When you are disconnected
from the camera for some
reason, cannot connect to the
camera at start up, or you are
not allowed to connect to the camera.
Camera Control Status window is shown in
red.
3-9