Computer System Selection - Canon LV-8225 User Manual

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment.
If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to
project a proper image without any additional settings. (Signal formats provided in this projector are shown on page
76.)
One of the following messages may appear when:
When the projector cannot recognize
Auto
the connected signal conforming to the
provided PC systems, Auto is displayed
on the System Menu box and the Auto
PC Adjustment function works to display
proper images. If the image is not projected
properly, a manual adjustment is required
(pp. 33-34).
There is no signal input from the
- - - -
computer. Check the connection between
your computer and the projector. (See
"Troubleshooting" on p. 71.)
The preset system is manually adjusted in
Mode 1
the PC adjust Menu. The adjusted data can
be stored in Mode 1-10 (pp. 33-34).
PC Systems provided in this projector is
SVGA 1
chosen. The projector chooses a proper
system provided in the projector and
displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input
and then press the Point ► or the OK button.
2
Use the Point ▲▼ buttons to select System and
then press the Point ► or the OK button.
3
Use the Point ▲▼ buttons to select the desired
system and then press the OK button.
Computer System Selection
PC System Menu
PC System Menu
Computer Input
Selected system in
the PC System Menu
is displayed.
Customized Mode
(1–10) set in the PC
adjust Menu (pp.
33-34).
Systems in this dialog box
can be selected.
31